Width
10, 12, 16, 20, 25, 32, 50, 75, 100, 150
In-between thickness (mm)
Standard Thicknesses (mm)
Min Length mm
720mm min. for custom lengths. Stock lengths are below.
Tolerance for total thickness (timing belt + coating)
Minimum Pulley Diameter per backing thickness (mm)
M - Width between holes (mm)
m - Hole CTC widthwise (mm)(mm)
a - Hole CTC Lenthwise (mm)
a1- Edge of Clamp to Hole Center (mm)(mm)
c - Hole spacing CTC (mm)
h - Clamp Base to top of tooth(mm)
Tension Member
Steel, Kevlar, Stainless, Hi flex, hi-flex VA
Options
Paz, DL, DR, Tcover
Stock Lengths
400, 440, 500, 530, 560, 580, 600, 610, 630, 66, 700, 720, 780, 800, 810, 840, 850, 880, 890, 920, 960, 970, 980, 1000, 1010, 1050, 1080, 1100, 1150, 1200, 1210, 1240, 1250, 1280, 1300, 1320, 1350, 1360, 1400, 1420, 1480, 1500, 1530, 1600, 1700, 1720, 1800, 1860, 1900, 1940, 2000, 2120, 2240, 2360, 2500, 2650, 2800, 3000, 3150, 3350, 3550, 3750, 4000, 4250, 4500, 4750, 5000, 5300, 5600, 6000, 6300, 6700, 7100, 7500, 8000, 9000
Hub Diameter dN / Hub Depth LN(mm)
Compatible Timing Belt (mm)
Width |
25 |
32 |
50 |
75 |
100 |
150 |
Note: |
Standard belt widths are shown. For in-between widths, please contact customer service. |
Max Length |
Further lengths up to 15,000mm available. Lengths can be increased in one tooth increments from a minimum length of 720mm |
Available Options |
Nylon facing on tooth side (PAZ), Double-Sided (DL), Extra thickness (DR) |
Tension Members |
Hi-Flex Steel standard, Steel optional |