BRECOroll

BRECOroll is an innovating T20 timing belt made specifically for reducing friction on long span conveyors. BRECOroll has rollers integrated into the teeth allowing the belt to glide order slider beds rather than drag across them.

When quoting or ordering, specify construction type: Open-ended M or Spliced and Welded V

No items found.
Part of the ATN-Convertible Product Series

BRECOroll

BRECOroll is an innovating T20 timing belt made specifically for reducing friction on long span conveyors. BRECOroll has rollers integrated into the teeth allowing the belt to glide order slider beds rather than drag across them.

When quoting or ordering, specify construction type: Open-ended M or Spliced and Welded V

This product is in stock for faster delivery

Key Product Features

BRECOroll Characteristics

· Replaces sliding friction with rolling friction of approximately half the value (μ <0.2)
· Maximum recommended speeds up to 1 m/s (3.28ft/s)
· Load bearing capacity of 6kg/tooth (13.2lbs/tooth)
· Rollers are located on every other tooth
· Available in 100mm wide T2

BRECOroll Advantages

· Longer belt life because of reduced friction and heat
· Smaller motor possible due to reduced friction forces
· Overall reduced energy consumption
· Cost savings on down time for belt replacement and drive maintenance
· Can accommodate backings and profiles

Product Overview

Product Specifications

Pitch

T20

Min Belt Length

Width

100

Max width (mm)

Width B (mm)

100

Length L (mm)

In-between thickness (mm)

Machinable

Standard Thicknesses (mm)

Min Length mm

1000mm min weld length

Material

TPUST1

Coeffecient of Friction

# of Teeth

Hardness

Temperature range

Max Length

100M

Tolerance for total thickness (timing belt + coating)

Minimum Pulley Diameter per backing thickness (mm)

Pitch Circle Dia. (mm)

Outside Diameter dK (mm)

d - hole diameter (mm)

M - Width between holes (mm)

m - Hole CTC widthwise (mm)(mm)

a - Hole CTC Lenthwise (mm)

a1- Edge of Clamp to Hole Center (mm)(mm)

c - Hole spacing CTC (mm)

h - Clamp Base to top of tooth(mm)

H - Clamp Thickness (mm)

Tension Member

Steel (standard), Hi-Flex, Stainless available

Face Width B (mm)

Options

Stock Lengths
100M
Width Over Hub BN (mm)

# of Flanges

Hub Diameter dN / Hub Depth LN(mm)

Pilot Bore dV (mm)

Compatible Timing Belt (mm)

Knowledge Base

Product Catalogs & Resources

Polyurethane Timing Belts and Pulleys

B212 High Performance Polyurethane Timing Belts & Pulleys
Polyurethane Timing Belts and Pulleys

Polyurethane Timing Belts and Pulleys

B212 High Performance Polyurethane Timing Belts & Pulleys
BRECOroll

BRECOroll

Engineering Bulletin B123

Suggested Products

Compatible Products

No compatible products at this time. Please view all of our products in the product category for more selections.
Contact Us

If you have any questions or comments please Contact Us and we will be happy to help you.

Contact Us